84
4
1
2
3
Removal Procedure
8
Remove the 2 screws fixing
the gas valve. Unsolder the
welding spot connecting gas valve
and air return pipe and remove
the gas valve.
(Note: it is necessary to warp
the gas valve when unsoldering
the welding spot.)
Remove the 2 screws fixing
liquid valve. Unsolder the
welding spot connecting liquid
valve and remove the liquid valve.
Unsolder the pipe connected
with the compressor.
Remove the 3 footing screws
of the compressor and
remove the
compressor.
Remove the 3 footing
screws of the compressor
and remove the
com
p
ressor.
Nut
Compressor
4-way valve assy
Unsolder weld point of
capillary, valve and outlet
pipe of condensator.
Then remove the
capillary. Don’t block the
capillary when unsoldering it.
(Note: before unsoldering,
discharge refrigerants
completely)
Remove the compressor
To Next Page
Loading...
