is on the displayer box.
Displayer indicator light control of indoor unit
Emergency operation
Emergency operation
Turn on the unit: At unit turned off, press
the button, the unit will run at Auto mode
immediately. The microcomputer will accord
●
to the indoor temperature to select (Cooling,
Heating, Fan) and obtain the comfortable effect.
Turn off the unit: At unit turned on, press the
button, the unit will stop working.
●
Fig.3
-11-
Manual switch
If the wireless remote control is lost
or broken, please use the manual switch
Auto mode, but the temperature and fan
button. At this time, the unit will run at the
To open the panel, the manual switch
speed cannot be changed. The operation
was shown as below:
Special selection button: for those users who do not want light at night.
Light on: press “light” button when the light is off, the indoor indicator light will
be on.
Light off: press “light” button when the light is on, the indoor indicator light will
be off.
●
●
Notice: when there’s no display of indoor indicator, please check the setting status
for light function of wireless remote controller.
To Next Page
Loading...
