63
Technical Information
Service Manual
6.1 Remote Controller Introduction of YAN1F6F(WiFi)
Introduction for icons on display screen
Introduction for buttons on remote controller
5
3
6
8
10
12
11
9
7
4
2
1
1
2
3
4
5
6
7
8
9
10
11
12
ON/OFF button
MODE button
FAN button
SWING button
TURBO button
TEMP button
WIFI button
LIGHT button
CLOCK button
TIMER ON / TIMER OFF
button
SLEEP button
▲/ button
▲
Send signal
Turbo mode
8
heating function
Set temperature
WiFi function
Set time
TIMER ON /
TIMER OFF
Child lock
Up & down swing
Set fan speed
Light
Temp. display type
:Set temp.
:Outdoor ambient temp.
:Indoor ambient temp.
Sleep mode
Clock
Heat mode
Fan mode
Dry mode
Cool mode
Auto mode
Operation mode
I feel
Note:
● After putting through the power, the air conditioner will give out a sound.
the colour is different for different
Operation indicator " " is ON (red indicator,
models). After that, you can operate the air conditioner by using remote controller.
●
Under on status, pressing the button on the remote controller, the signal icon " "
will blink once and the air conditioner will give
on the display of remote controller
conditioner.
out a “de” sound, which means the signal has been sent to the air
● Under off status, set temperature and clock icon will be displayed on the display
off and light functions are set, the corre-
of remote controller (If timer on, timer
sponding icons will be displayed on the display of remote controller at the same
time); Under on status, the display will show the corresponding set function icons.
● This is a general use remote controller, it could be used for the air conditioners
which the model doesn't have, if press
with multifunction; For some function,
the corresponding button on the remote controller that the unit will keep the
original running status.
6. Function and Control
To Next Page
Loading...
