Need help?Do you have a question about the Gree GWH(07)RA-K3DNA3E/I and is the answer not in the manual?
General| Cooling Capacity | 2.05 kW |
|---|---|
| Cooling Capacity (BTU/h) | 7000 BTU/h |
| Heating Capacity | 2.2 kW |
| Heating Capacity (BTU/h) | 7500 BTU/h |
| Energy Efficiency Ratio (EER) | 3.21 |
| Coefficient of Performance (COP) | 3.61 |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R32 |
| Outdoor Unit Dimensions (W x H x D) | 720 x 428 x 310 mm |
| Operating Temperature (Heating) | -7-24°C |
| Type | Split Air Conditioner |
| Noise Level (Outdoor) | 50 dB(A) |
| Operating Temperature (Cooling) | 18°C to 43°C |
Overview of available outdoor, BU, and indoor unit models.
Explains the coding system for unit models.
Details the operational functions of indoor units.
Technical specifications for outdoor units and indoor units.
Covers piping diagrams, dimensions, and operating temperature ranges.
Illustrates the sequence of unit operations.
Explains outdoor unit control, protection functions, and indoor unit logic.
Instructions for wired and wireless remote controllers.
Details the functions and operation of the smart zone controller.
Safety and general guidelines before and during installation.
Specific steps and precautions for installing the outdoor unit.
Installation procedures for wall-mounted, duct, cassette, floor ceiling, and console types.
Steps and considerations for installing the BU module.
Covers pipe dimensions, connections, leak testing, and electrical wiring.
Guidelines for installing condensate and drainage pipes.
Instructions for insulating connection pipes.
Explains the testing board interface and parameter settings.
Guides on diagnosing and resolving unit malfunctions.
Step-by-step guides for disassembling and assembling main unit parts.
Detailed diagrams and part numbers for component identification.
To Next Page