207
Installation and Maintenance
Service Manual
Motor
Screw
Screw
Motor support
remove the motor.
7.Remove motor
and then remove the motor support.
8.Remove motor support
Spot weld
4-way valve assy
9.Remove 4-way valve assy
Unsolder the spot weld of 4-way valve assy,
compressor and condenser, and then remove
the 4-way valve assy .
Note:
When unsoldering the spot weld, wrap the
4-way valve with wet cloth completely to avoid
damaging the valve due to high temperature.
Procedure
Step
To Next Page
Loading...
