Gree GWH09AAB-K3DNA1A/I

73
Installation and Maintenance
Service Manual
Caution: discharge the refrigerant
completely before removal.
a
b
Open the front panel; separate the panel
rotation shaft from the groove fixing the
front panel and then removes the front
panel.
Note:
The display of some models is fixed on
display on the panel before removing the
panel.
Electric box cover 2
Detecting plate(WIFI)
Screw
Display
Screws
Front case
sub-assy
Panel
Groove
3. Remove panel
4. Remove electric box cover 2 and detecting plate
5. Remove front case sub-assy
Front case
sub-assy
Clasp
Screw caps
Screws
Screws
Note:
(1) Open the screw caps before removing
the screws around the air outlet.
case sub-assy is different for different
models.
Loosen the clasps at left, middle and right
sides of front case. Life the front case
sub-assy upwards to remove it.
ProcedureStep
Remove the screws on the electric box
cover 2 and detecting plate(WIFI), then
remove the electric box cover 2 and
detecting plate(WIFI).
Note:The position of detection board(WIFI)
may be different for different models.