30
Technical Information
Service Manual
6.3 Operation of Smart Control (Smart Phone, Tablet PC)
Operation Instructions
Download and install APP
Scan the following QR code with your smart phone and download Wi Smart.
Conguration
1.Original conguration
Before operation, please nish the following conguration in order to realize Wi control and the connection between air conditioner and
intelligent device.
(1).Short-distance control setting for air conditioner using wi hotspot
Step 1: Air conditioner wi is set in APP mode in factory.
You can search the air conditioner wifi hotspot through your smart phone.The name of wifi hotspot is the last 8 numbers of the air
conditioner mac address. Password is 12345678.
Step 2: Open APP and the screen will show the air conditioner that you just connected. Tap the name of this air conditioner on your
phone to enter and realize short-distance control, as shown below. Please refer to "Functions introduction" for specic control methods.
Install the APP according to its guidance. When successfully installed, your smart phone homepage will show this icon
NOTE: Select either the original conguration or AP conguration according to the APP functions.
User of IOS system can search for the Wi Smart in Apple store to download the Apple version APP. Android user can search "WiFi
Smart" on Google Play to download it.
gree-a
gr-cn
gr-cn
gr-dh
NOTE:One AC can be controlled by 4 cell phone in maximun at the same time.
To Next Page
Loading...
