37
Technical Information
Service Manual
Continue to select the next execution device as instructed above. Tap to set the interval.
Tap "Save". Tap the scene picture displayed on homepage "Device" to send the command. Then the scene "Back home"
will be in execution. You may view the execution condition of the scene.
(3) Preset includes single-device preset and multi-device preset
Single-device preset: This can preset a certain device to be On/Off at a specic time.
On the homepage "Device", take air conditioner "babyroom" as an example. Tap at the bottom of the page "babyroom".
Then you will enter the page "Preset edit".
Slide up and down to set the time. If you need to synchronize the time, tap " synchronize". IIf such "Hint" interface hasnt appeared,
please skip this operation procedure.
To Next Page
Loading...
