The indoor unit should be installed close to the wall
reachable after finishing installation.
Please notice that the unit is filled with flammable gas
R32. Inappropriate treatment of the unit involves the
risk of severe damages of people and material. Details
to this refrigerant are found in chapter “refrigerant”.
Check whether the maintenance area or the room area
meet the requirement of the nameplate.
- It’s only allowed to be operated in the rooms that meet
the requirement of the nameplate.
Check whether the maintenance area is well-ventilated.
- The continuous ventilation status should be kept
- The naked flame is prohibited in the maintenance area;
- Replace the vague or damaged warning mark.
unload and open the container.
in the maintenance area.
during the operation process.
and the “no smoking” warning board should be hanged.
Check whether there is fire source or potential fire source
Check whether the appliance mark is in good condition.
Please use the flammable gas detector to check before
No fire source and smoking.
According to the local rules and laws.
far away from animals or plants.If it is unavoidable,
please add the fence for safety purpose.
6
Precautions
WARNING
place, only the qualified person can perform the work.
Otherwise, it may cause personal injury or damage.
If you need to relocate the air conditioner to another
must be installed in the line.
For the air conditioner without plug, an circuit break
Select a location which is out of reach for children and
For the air conditioner with plug
,
the plug should be
To Next Page
Loading...
