Gree GWH09ACC-K6DNA1A/I User Manual

Change for life
AIR CONDITIONER
Owner's Manual
Original Instructions
Thank you for choosing our product.
Please read this Owner’
retain it for future reference.
If you have lost the Owner's Manual, please contact the local agent
or visit www.gree.com or send an email to global@gree.com.cn for
the electronic version.
s Manual carefully before operation and
Split Air Conditioner

Gree GWH09ACC-K6DNA1A/I Specifications

General

Seasonal Energy Efficiency Ratio (SEER)	6.1
Power Supply	220-240V, 50Hz
Refrigerant	R32
Indoor Unit Dimensions (W x H x D)	698 x 255 x 190 mm
Outdoor Unit Dimensions (W x H x D)	720 x 428 x 310 mm
Noise Level (Outdoor Unit)	50 dB
Type	Split
Cooling Capacity	9000 BTU
Heating Capacity	9000 BTU/h
Energy Efficiency Ratio (EER)	3.21
Operating Temperature (Cooling)	18°C to 43°C

Summary

Operation Notices

Refrigerant Information

Explains the refrigerant used in the air conditioner unit, its properties, and safety.

Safety Precautions

Details safety measures for operation, maintenance, and general use of the appliance.

Parts Identification

Identifies and labels the key components of the indoor and outdoor units.

Installation Guidelines

Flammable Refrigerant Safety

Outlines qualifications for installation/maintenance personnel and installation safety notes.

Installation Dimension Diagram

Provides a diagram showing required clearances for indoor unit installation.

Installation and Relocation Safety

Details critical safety measures for unit installation, relocation, and refrigerant handling.

Installation Tools and Location Selection

Lists necessary tools and provides requirements for selecting installation locations.

Electrical Connection Requirements

Specifies safety precautions and grounding requirements for electrical connections.

Unit Installation Procedures

Indoor Unit Installation Steps

Guides through the steps of choosing location, installing the wall-mounting frame, and opening piping holes.

Vacuum Pumping Procedure

Details the process of vacuum pumping using a vacuum pump and piezometer.

Refrigerant Leakage Detection

Explains methods for detecting refrigerant leaks using a detector or soap water.

Post-Installation Checks

Lists checks to be performed after installation to ensure proper functioning and prevent malfunctions.

Test and Operation

Test Operation Guide

Outlines preparation and method for conducting the test operation after installation.

Attachment Details

Connection Pipe Configuration

Provides information on standard, minimum, and maximum lengths of connection pipes.

Pipe Expanding Method

Details the steps for properly expanding pipes to prevent refrigerant leakage.

Malfunction Analysis

General Phenomenon Analysis

Provides solutions for common issues like no remote action, no air emission, and poor cooling effects.

Error Code Troubleshooting

Lists error codes and their corresponding troubleshooting steps for abnormal air conditioner status.