Clean and maintenance
13
maximum
panel
panel
Storage groove of screw
Air-outlet frame clean
Caution
The black screw is the removable screw. Prohibit disassembling the silver screw
at your will (except the silver screw of blade).
Prevent the air-outlet frame dropping to avoid injury.
①Open the panel with both hands.
When the panel is opened to the
maximum angle (when a sound has
been heard), the panel can be fixed.
③Open the screw cover at the lower
side of the air-outlet frame and then
use screwdriver to remove 2 black
screws.
⑤Immerse the cloth into the warm water (less than 45℃), wring it out and
then use it to wipe the dirty part, and then dry it.
②Use screwdriver to remove 3 black
screws on the upper side of the
air-outlet frame. After that, put the
screws into the storage box of screw.
④Pull the air-outlet frame outwards
according to the diagram as below
and then remove it.
To Next Page
Loading...
