Gree GWH09UB-K6DNA4A - Page 86

83
Installation and Maintenance
Service Manual
a
b
c
d
c
d
Remove 4 screws xing the motor press plate
with screwdriver.
screws
Take out the motor press plate.
motor press plate
Take out cross ow blade and motor.
cross ow blade
motor
Pull out the shaft rubber cushion block with
hand.
shaft rubber cushion block
Remove swing motor sub-assy.
Take out swing connection rod to separate it
from the swing blade.
swing connection rod
swing motor sub-assy
7. Remove cross ow blade and motor
Procedure
Steps