72
Technical Information
Service Manual
When setting T-ON, T-OFF or CLOCK, press "▲" or " " button to adjust time. (Refer to CLOCK, T-ON, T-OFF buttons)
After selecting cool mode, air conditioner will operate under cool mode. Cool indicator " " on indoor unit is ON.
（This indicator is not available for some models） Press "▲" or " " button to adjust set temperature.
Press "FAN" button to adjust fan speed. Press " " / " " button to adjust fan blowing angle.
AUTO COOL FANDRYHEAT
Press this button to select your required operation mode.
When selecting auto mode, air conditioner will operate automatically according to the sensed temperature. Set temperature
can’t be adjusted and will not be displayed as well. Press "FAN" button can adjust fan speed. Press " " / " " button can
adjust fan blowing angle.
When selecting dry mode, the air conditioner operates at low speed under dry mode. Dry indicator " " on indoor unit is ON.
Under dry mode, fan speed can’t be adjusted. Press " " / " " button to
When selecting fan mode, the air conditioner will only blow fan, no cooling and no heating. All indicators are OFF,Operation
indicator is ON. Press "FAN" button to adjust fan speed. Press" " / " " button to adjust fan blowing angle.
When selecting heating mode, the air conditioner operates under heat mode. Heat indicator " " on indoor unit is ON.
（This indicator is not available for some models）Press "▲" or " " button to adjust set temperature. Press "FAN" button
to adjust fan speed. Press " " / " " button to adjust fan blowing angle. (Cooling only unit won’t receive heating mode signal.
If setting heat mode with remote controller, press ON/OFF button can’t start up the unit).
Under AUTO speed, air conditioner will select proper fan speed automatically according to ex-factory setting.
It’s Low fan speed under Dry mode.
X-FAN function Hold fan speed button for 2s in COOL or DRY mode, the icon “ ” is displayed and the indoor fan will continue
operation for a few minutes in order to dry the indoor unit even though you have turned off the unit. After energization, X-FAN
OFF is defaulted. X-FAN is not available in AUTO, FAN or HEAT mode.
This function indicates that moisture on evaporator of indoor unit will be blowed after the unit is stopped to avoid mould.
Having set X-FAN function on: After turning off the unit by pressing ON/OF button indoor fan will continue running for a few
minutes. at low speed. In this period, Hold fan speed button for 2s to stop indoor fan directly.
Having set X-FAN function off: After turning off the unit by pressing ON/OFF button, the complete unit will be off directly.
Under COOL or HEAT mode, press this button to turn to quick COOL or quick HEAT mode. " " icon is displayed on remote
controller. Press this button again to exit turbo function and " " icon will disappear.
If start this function, the unit will run at super-high fan speed to cool or heat quickly so that the ambient temp. approachs the
preset temp. as soon as possible.
TURBO button
Pressing this button can set fan speed circularly as: auto (AUTO), low( ), medium
( ), high( ).
Auto
This indicator is not available for some models）
adjust fan blowing angle.
Press this button to turn on the unit. Press this button again to turn off the unit.
To Next Page
Loading...
