106
Disassembly of Indoor Unit
18,000 btuh Warning - Wait 10 minutes a er power is disconnected before starting disassembly.
Step 2. Remove the rotating sha of the big guide
lover from the groove, slightly bend the big guide
louver to remove it.
Step 3. Remove the axial bushing of the small guide
louver
Step 4. Remove the rotating sha of the small guide
lover from the groove, slightly bend the small guide
louver to remove it.
3. Remove guide louver, continued
Small guide louver
Axial bushing
Big guide louver
Step 1. Loosen the clamps holding the panel, then
remove panel.
Step 2. Remove the screws holding the display, then
remove display
4. Remove panel
Display
To Next Page
Loading...