116
Installation and Maintenance
Step Procedure
7. Remove valve suppprt
Remove the screws xing valve support, then remove
the valve support.
8. Remove electronic expansion valve
Remove the terminals of the electric expand valve
fitting and rotate to remove the electric expand valve
tting
.
Unsolder the welding joint connecting the electronic
expansion Valve and then remove the electronic
expansion valve.
9. Remove electric box assy
Remove the terminals, lift up and rotate the electrical
box assy to the right so that the snaps on the clapboard
are removed and the electrical box assy are removed.
valve supprt
welding joint
electric expansion
valve sub-Assy
To Next Page
Loading...
