25
Technical Information
Service Manual
6. Function and Control
6.1 Remote Controller Introduction
Buttons on Remote Controller
Note:
● This is a general use remote controller, it could be used for the air conditionerswith multifunction; For some function,
● After putting through the power, the air conditioner will give out a sound.Operation indicator " " is ON (red indicator
is different for different). After that, you can operate the air conditioner by using remote controller.
which the model doesnt have, if pressthe corresponding button on the remote controller that the unit will keep
the original running status.
● When power is connected(stand by condition), you can operate the air conditioner through the remote controller
.
● Under on status, pressing the button on the remote controller, the signal icon " " on the display of rem
ote controller will
blink once and the air conditioner will give out a “de” sound, which means the signal has been sent to the ai
r conditioner.
● Under off status, set temperature and clock icon will be displayed on the display of remote controller (If time
r on, timer off and
light functions are set, the corresponding icons will be displayed on the display of remote controller at the
same time); Under on
status, the display will show the corresponding set function icons.
1
2
5
4
6
7
8
11
12
9
On/Off button
▲/ button
3
Fan button
Swing button
X-Fan button
Turbo button
Light button
10
Temp button
I Feel button
Timer button
Sleep button
Mode button
▲
Send signal
Turbo mode
8 heating function
Set temperature
Set time
TIMER ON /TIMER OFF
Child lock
Up & down swing
Set fan speed
Light function
Temp. display type
:Set temp.
:Outdoor ambient temp.
:Indoor ambient temp.
Sleep mode
Heat mode
Fan mode
Dry mode
Cool mode
Auto mode
Operation mode
I feel function
X-fan mode
health function
ventilation operation
2
5
7
9
4
12
3
1
6
8
10
11
NOTICE:
“ ” This is a general remote controller. Some models have this function while some
do not. Please refer to the actual models.
°C