Gree GWH24QE-K6DNA1C/O User Manual

CONTENTS
Safety precautions
......................................................................................
01
..................................................................................................
05
.........................................................................................
06
............................................................................
08
.......................................................................................
10
..................................................................
11
Change for life
Owner's Manual
Parts name
Installation notice
Installation of outdoor unit
Test and operation
Configuration of connection pipe
Original Instructions
Split Air Conditioner
Notice：
Actual product may be different from graphics,
please refer to actual products.
Thank you for choosing our product.
Please read this Owner’s Manual carefully before operation and
retain it for future reference.
If you have lost the Owner's Manual, please contact the local agent
or visit www.gree.com or send an email to global@cn.gree.com for
the electronic version.

Gree GWH24QE-K6DNA1C/O Specifications

General

Type	Split
Power Supply	220-240V, 50Hz
Refrigerant	R410A
Indoor Unit Weight	12 kg
Cooling Capacity	24, 000 BTU/h

Summary

Safety Precautions

Installation Safety Warnings

Crucial safety instructions for installing the air conditioner, covering electrical and physical aspects.

Installation and Usage Cautions

Important cautions for safe installation and initial use, including location and electrical connections.

Operation and Maintenance Safety

Safety guidelines for operating and maintaining the air conditioner, with warnings for children.

Installation Notice

Installation Notes and Precautions

Key installation guidelines, safety precautions for unit installation and relocation, and required tools.

Selection of Installation Location

Installation Safety Precautions

Essential safety regulations and procedures to follow during unit installation.

Electrical Connection Requirements

Grounding Requirements

Test and Operation

Pre-operation Checks and Vacuuming

Procedures for vacuuming the system and performing leakage detection before operation.

Post-Installation Checks

Conducting Test Operation

Steps for performing the initial test operation and verifying functionality.