45
Technical Information
Service Manual
1. Starting estimation:
inner pipe
>
2. Frequency limited
inner pipe
compressor.
3. Reducing frequency at normal speed:
inner pipe
4. Reducing frequency at high speed:
inner pipe
5. Power turn-off:
inner pipe
]
<T
inner pipe
mode transferring will not clear it).
(5) Overload protection function
1. Starting estimation:
2. Frequency limited
compressor.
3. Reducing frequency at normal speed and power turn-off:
,
4. Reducing frequency at high speed and stop machine:
],
5. Power turn-off:
mode will not clear it).
Overload protection function at the mode of heating
Starting estimation :
protection: