78
Installation and Maintenance
Service Manual
11. Removal Procedure
11.1 Removal Procedure of Indoor Unit
Warning: Be sure to wait for a minimum of 20 minutes
after turning off all power supplies and discharge the
refrigerant completely before removal.
ProcedureSteps
a
a
b
panel
clasp
1. Remove filter
Open the panel.
Loosen the clasp shown in the fig and then pull
the left filter and right filer outwards to remove
them.
2. Remove panel
Remove two screws fixing display and then
remove it.
screws
display
filer
To Next Page
Loading...
