Gree GWHD24NK3FO - Disassembly and Assembly of Electronic Expansion Valve; 1. Remove Electronic Expansion Valve Coil; 2. Disconnect Electronic Expansion Valve and Pipe; 3. Replace the Electronic Expansion Valve

103
Installation and Maintenance
Service Manual
3. Take down the bad compressor
4. Place the new compressor on the bottom plate and connect the
suction inlet and discharge outlet with the pipe system
① Place the compressor on the bottom plate.
② Tighen the nuts by using a tool.
① Remove the bolts on the compressor by using a tool.
② Take down the bad compressor from the bottom plate.
Steps Procedure
Steps Procedure
1. Remove the 4-way valve coil
Disassembly and Assembly of 4-way Valve
① Remove the screws on the fixed coil by using a
screwdriver.
② Remove the 4-way valve coil.