94
Installation and Maintenance
Service Manual
Twist off the screws used for fixing and valve
cover
,
pull
v
alve cover
up
ward to remove it.
b
a
a
1. Remove valve cover and top panel
Remove the 3 screws connecting the top
panel with the front panel and the right side
plate, and then remove the top panel.
2. Remove grille,
front side plate and panel.
Remove
Remove the 1 screw connecting the front side
plate and the panel,and then remove the front
side plate.
the 2 screws connecting the grille
and the panel, and then remove the grille.
b
Steps
Procedure
grille
front side plate
top panel
valve cover
(2)Models:GWHD(24)NK3FO GWHD(24)NK3GO GWHD(28) NK3FO
Take GWHD(28) NK3FO for example(Only cut-off valve of valve support, electronic expansion valve and coil have some differences)
To Next Page
Loading...
