Ｉｆ Ｔａｍｂ＜Ｔｓｅｔ－２℃，ｃｏｍｐｒｅｓｓｏｒ， ｏｕｔｄｏｏｒ ｆａｎ ｍｏｔｏｒ ｗｉｌｌ ｓｔｏｐ ｒｕｎｎｉｎｇ， ｉｎｄｏｏｒ ｆａｎ ｍｏｔｏｒ ｗｉｌｌ ｋｅｅｐ ｌｏｗ ｆａｎ ｓｐｅｅｄ ｒｕｎｎｉｎｇ．
Ｉｎ ｔｈｉｓ ｍｏｄｅ， ｔｈｅ ｒｅｖｅｒｓａｌ ｖａｌｖｅ ｗｉｌｌ ｎｏｔ ｐｏｗｅｒ ｏｎ， ｔｈｅ ｓｅｔｔｉｎｇ ｔｅｍｐ． ｒａｎｇｅ ：１６℃－３０℃．
Protection Functions
Antifreezing Protection
When running in Antifreezing protection, the compressor, outter fan motor, stop running, indoor fan motor runs at low fan speed;
when antifreezing is eliminated and compressor has stopped for 4min, the unit will run at the original status.
HEAT Mode
The conditions and processes of heating
Ｉｆ Ｔａｍｂ≤Ｔｓｅｔ＋２℃，ｅｎｔｅｒ ｉｎｔｏ ＨＥＡＴ ｍｏｄｅ，ａｔ ｔｈｅ ｓａｍｅ ｔｉｍｅ， ｒｅｖｅｒｓｉｎｇ ｖａｌｖｅ，ｃｏｍｐｒｅｓｓｏｒ，ｏｕｔｄｏｏｒ ｆａｎ
ｓｔａｒｔ ｔｏ ｒｕｎ， ｂｕｔ ｉｎｄｏｏｒ ｆａｎ ｗｉｌｌ ｄｅｌａｙ ３ｍｉｎ ａｔ ｌｅａｓｔ ｔｏ ｒｕｎ．
Ｉｆ Ｔａｍｂ≥Ｔｓｅｔ＋４℃，ｃｏｍｐｒｅｓｓｏｒ，ｏｕｔｄｏｏｒ ｆａｎ ｓｔｏｐ ｒｕｎｎｉｎｇ，ｔｈｅ ｒｅｖｅｒｓｉｎｇ ｖａｌｖｅ ｗｉｌｌ ｒｕｎ，ｂｕｔ ｉｎｄｏｏｒ
ｆａｎ ｗｉｌｌ ｂｌｏｗ ｗｉｎｄ ａｆｔｅｒ ６０ｓｅｃ． ａｔ ｌｏｗ ｆａｎ ｓｐｅｅｄ．
Ｉｆ Ｔｓｅｔ＋２℃＜Ｔａｍｂ＜Ｔｓｅｔ＋４℃， ｔｈｅ ｓｅｔｔｉｎｇ ｒａｎｇｅ：１６℃－３０℃．
The conditions and processes of defrosting
Ultra thin split unit series
Ｗｈｅｎ Ｔｓｅｔ＋２℃＜Ｔａｍｂ＜Ｔｓｅｔ＋４℃ｉｔ ｗｉｌｌ ｋｅｅｐ ｔｈｅ ｐｒｅｃｅｄｉｎｇ ｒｕｎｎｉｎｇ ｓｔａｔｕｓ．
Ｗｈｅｎ ｄｅｔｅｃｔｉｎｇ ｔｈｅｒｅ ｉｓ ｆｒｏｓｔ ｏｎ ｔｈｅ ｃｏｎｄｅｎｓｅｒ， ｓｙｓｔｅｍ ｅｎｔｅｒ ｉｎｔｏ ｄｅｆｒｏｓｔｉｎｇ ｓｔａｔｅ， ａｔ ｔｈｉｓ ｔｉｍｅ， ｃｏｍｐｒｅｓｓｏｒ ｃｏｎｔｉｎｕｅ ｔｏ ｒｕｎ， ｔｈｅ ｏｕｔｔｅｒ
ｆａｎ ｍｏｔｏｒ， ４－ｗａｙ ｖａｌｖｅ， ｉｎｄｏｏｒ ｆａｎ ｍｏｔｏｒ ｓｔｏｐ ｒｕｎｎｉｎｇ， ｔｈｅ ｒｕｎｎｉｎｇ ｉｎｄｉｃａｔｏｒ ｆｌａｓｈ， ｗｈｅｎ ｄｅｔｅｃｔｉｎｇ ｔｈｅ ｆｒｏｓｔ ｏｎ ｔｈｅ ｃｏｎｄｅｎｓｅｒ ｅｌｉｍａｔｅｄ，
New defrosting mode (Single split type series)
To Next Page
Loading...
Need help?
General
