125
1. Remove the
front panel.
(1)Remove screws at the front
panel;
(2)Loosened screws should be
put together to avoid loss;
(3)Pull the front panel upwards
and then remove it;
(4)Properly keep the removed
front panel to avoid from being
damaged.
Note: there are two clasps at each
panel for connecting with side
panels.
2. Remove the
electric control
box.
(1)Disconnect electric lines
inside and outside of the
electric box;
(2)Protection measures should
be taken to the internal
elements to prevent them from
being damaged.
A Series Modular-type Air-cooled (Heat Pump) Chiller
To Next Page
Loading...
