2
NOTE
(1)Do not install the unit where there is high-intensity magnetic field or it is highly basic
or acid or the voltage is quietly unstable.
(2)Do not install the unit where there would be leaked inflammable gas, as it would lead
to fire hazards.
(3)The outer casing of the unit should be grounded. Do not connect the grounding line
to the gas line, water line, lightning rod or communication line, otherwise it would
lead to electric shocks.
(4)Do not stand on the unit or place other object on it.
(5)Do not insert fingers or other objects into the outlet grill to prevent damage to the unit
or personal injury or death.
(6)Do not start or stop the unit by inserting or drawing out the power plug.
(7)Do not let children play with this unit.
(8)The unit should be equipped with the leakage protector which should be installed in
accordance with electric technical standards. Uninstallation or incorrect installation
would lead to electrocution. Do electric leakage detection after electric installation is
finished.
(9)Volatile liquid like thinner or gasoline would damage appearance of the unit. (Only
clean the outer casing with of the unit with soft dry cloth or wet cloth with neutral
detergent.
DANGER
(1)Do not install the unit where conditions are severe, where it is close to the hot spring,
coast or oil field, as it would lead to corrosion, electrocution or fire hazards.
Besides, do not install the unit where there are corrosive, inflammable substances
or smog, otherwise it would lead to normal operation failure, shortened service life,
fire hazard, or severe injury.
(2)Do not start the compressor by manually closing the AC contactor, otherwise it would
lead to electrocution or fire hazard.
(3)Do not misuse refrigerant, as it would lead to normal operation failure, unsatisfactory
performance, fire hazards or even explosion etc.
A Series Inverter Modular Air-cooled Chiller (Heat Pump)
To Next Page
Loading...
Need help?
General