EasyManua.ls Logo

Gree U-Match GU160W/A1-M

Gree U-Match GU160W/A1-M
54 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Owner's Manual
Original Instructions
Air Conditioners
U-Match Series Cassette Type Unit
Models:
Indoor Unit
Outdoor Unit
GUD50T/A1-K
GU50W/A1-K
GU71T/A1-K
GU71W/A1-K
GU85T/A1-K
GU85W/A1-K
GU100T/A1-K
GU100W/A1-M
GU125T/A1-K
GU125W/A1-M
GU140T/A1-K
GU140W/A1-M
GU160T/A1-K
GU160W/A1-M
Question and Answer IconNeed help?

Do you have a question about the Gree U-Match GU160W/A1-M and is the answer not in the manual?

Gree U-Match GU160W/A1-M Specifications

General IconGeneral
Power Supply380-415V/3Ph/50Hz
RefrigerantR410A
Indoor Unit Dimensions (W x H x D)1285 x 235 x 675 mm
Outdoor Unit Dimensions (W x H x D)1100 x 1100 x 390 mm
TypeSplit Type
Cooling Capacity (kW)16 kW
Heating Capacity (kW)18 kW
EER2.80
Noise Level (Outdoor)56 dB(A)
Air Flow (Indoor)1700 m³/h
Air Flow (Outdoor)5400 m3/h

Summary

Safety Notices

Prohibited Actions

Lists actions that must not be performed to prevent severe damage or injury.

General Warnings and Notes

Highlights potential damage, important operational advice, and safety precautions.

Observed Precautions

Details specific observations and actions required for user safety and property protection.

Product Introduction

Overall Layout

Illustrates and labels the main components of the cassette type air conditioner unit.

Product Operating Range

Specifies the temperature ranges for optimal cooling and heating performance.

Standard Accessories

Lists and shows the appearance of accessories included with the indoor unit.

Installation

Installation Preparation and Location

Covers site selection, checks, and preparations before unit installation.

Unit Dimensions and Space Requirements

Provides physical dimensions, required clearances, and spacing for unit installation.

Indoor and Outdoor Unit Installation Procedures

Details mounting, hoisting, leveling, and securing both indoor and outdoor units.

Connection Pipe and Drainage System Installation

Covers pipe requirements, flaring, bending, connecting, insulation, vacuum, and drainage setup.

Front Panel and Electrical Installation

Details front panel attachment and electrical connection requirements, parameters, and wiring.

Post-Installation Checks and Test Running

Lists essential checks, test running procedures, and initial operation guidelines.

Maintenance

Troubleshooting Common Failures

Provides common failure scenarios and their possible causes before professional repair.

Error Code Reference

Lists error codes displayed by the unit and their corresponding meanings for diagnosis.

Routine Maintenance Procedures

Covers cleaning filters, intake grills, drainage pipes, and seasonal checks.

After-Sales Support

Information on obtaining replacement parts and contacting service for issues.

Related product manuals