DC Inverter U-Match Series Cassette Type Unit
43
1) Indoor side
Take off the electric box cover from the sub-assembly of electric box.
Then connect the wires. Connect the connection wires of indoor unit
according to the corresponding marks.
2) Outdoor side
Remove the big handle/front panel of the outdoor unit and insert one
end of the communication cord and the power cord to the terminal
board.
Single-phase unit: GUD35W/A-S; GUD50W/A-S; GUD71W/A1-S;
GUD71W/A-S; GUD100W/A-S
a) Wire routing of separated power supply:
To Next Page
Loading...
