Gree WSBEC02 - User Manual

Module Installation
Universal Wi-Fi Kit
INSTRUCTIONAL GUIDE
WSBEC02/WSBEE03
STEP 1. Open the front panel of indoor unit
Remove screw to access the electrical box.
NOTE: Actual product may differ from images shown; please refer to actual products.
STEP 2. Remove the electrical box cover
Locate Wi-Fi module connector and wire. (The Wi-Fi connector will be the same
color as the connector on the Wi-Fi module.)
STEP 3. Remove the wire clip
Route Wi-Fi module wire into electrical box and connect to the unit's Wi-Fi connector.
NOTE: The Wi-Fi module wire must be routed through the wire channel, otherwise
the electrical box cover will not close properly.
STEP 4. The Wi-Fi module mounting location varies from model to model
To the right are the common mounting locations. Choose the one that best fits your
model. Place the Wi-Fi module in the mounting location and secure it with a screw.
STEP 5. Replace the electrical box cover and secure with a screw
The Wi-Fi module installation is complete.
Front panel
Wire clip
Wi-Fi connector
Wi-Fi module
Wi-Fi module
Wi-Fi module
Wi-Fi module
Wi-Fi module wire
Screw
Electrical
box cover
1.
2.
3.
4.
Failure to follow this warning could result in personal injury or death.
• Before installing, servicing or modifying the system, the main electrical disconnect
switch must be in the OFF position. There may be more than one disconnect switch.
Lock out and tag all switches with a warning label.
• Installation must be performed by qualified professionals. Otherwise, it may result
in personal injury or damage.
WARNING – ELECTRIC SHOCK HAZARD

Summary

Module Installation

Electric Shock Hazard Warning

Critical safety precautions against electric shock during installation procedures.

Open Front Panel and Access Electrical Box

Instructions to remove the front panel to access the unit's electrical box.

Remove Electrical Box Cover and Locate Wire

Guidance on removing the electrical box cover and identifying the Wi-Fi connector.

Route Wire and Connect Wi-Fi Module

Steps for routing the Wi-Fi module wire and connecting it to the unit's connector.

Mount Wi-Fi Module and Secure

Instructions for choosing a mounting location and securing the Wi-Fi module with a screw.

Replace Electrical Box Cover

Final step to reattach and secure the electrical box cover after installation.

Smartphone Control Setup

Smartphone OS Compatibility

Specifies minimum operating system requirements for iOS and Android devices.

Download and Install GREE+ App

Guide to obtaining and installing the GREE+ smartphone application.

Enable Unit Wi-Fi Interface

Instructions to activate the unit's Wi-Fi function using the remote control.

Launch GREE+ App and Register

Steps to open the GREE+ app and complete the initial user registration.

Using the GREE+ App

Overview of controlling the unit's comfort levels via the smartphone app.

Troubleshoot Network Connection Issues

Common problems and solutions for Wi-Fi control failures.

Reset Wi-Fi Module Procedure

Instructions for resetting the Wi-Fi module by pressing specific buttons.

Gree WSBEC02 Specifications

General

Brand	Gree
Model	WSBEC02
Category	Network Card
Language	English