35
Installation and Maintenance
Service Manual
If the name of router or the password is wrong, Wifi Smart can’t connect to the wireless router. 2 mins later, please conduct the
conguration operation again. Reset Wi-Fi adaptor by pointing you remote at the indoor unit and holding the mode and Turbo buttons on
your remote control for 10 seconds and until you hear the beep.
Wrong server selection will cause long-distance control invalid. Therefore, please make sure thatthe server selection when
registering the account is the same as this one.
If the password is blank, no password is defaulted for the wireless router, which is the OPEN mode.
Conguration should be conducted at one time. As for other phones, they can automatically search for the device after connecting to the
wireless router (such as Tenda_XXX) and turning on the APP.
Functions introduction
1.User registration
Purpose: To realize long-distance control.
Operation instruction: For the rst time login, you have to register a new username. If you already have a username, skip the registration
step and enter email address and password on the "Login Page" to log in. If password is forgotton, you can reset the password.
Operation steps:
(1) Select the sever address.
(2) Account login: Slide the page "Device", and enter the menu page on the left.Tap "Login" to enter the page "Register
username". New user must rst register a username. Tap "Register”.
(3) If password is forgotten, you can reset the password with your email address.
Tap "Forgot password" and enter the page "Forgot password". Enter your registered email account the rst. Tap "Get verication code" to
get an email verication code. Enter a new password and tap "OK" to log in.
To Next Page
Loading...
Need help?
General
