Gree YT1F - Wired Remote Controller Operation: E-heater; E-heater Auxiliary Heating Function

12
3.11 E-heater Setting
91KX rellortnoC etomeR deriW
E-heater (auxiliary electric heating function): In the Heating mode, E-heater is allowed to be
Once the wired remote controller or the remote controller enters the Heating mode, this function
will be turned on automatically.
The setting of this function is shown as Fig.14 below:
Press Function to enter the E-heater setting interface, if the E-heater function is not activated,
and then press Enter/Cancel to turn it on.
Press Function in the Heating mode to enter the E-heater setting interface and then press
Enter/Cancel to cancel this function.
Fig.14 E-heater Setting