Green-Go GGO-WBPX User Manual

Green Go Wireless Beltpack
model nr. GGO-WBPX
Table of contents
The portable station that allows you to connect to all desired stations on the Green Go network.
The Wireless Beltpack connects via the Green Go antenna – WAA and uses DECT technology.
As all other stations in the Green Go network, the beltpack contains a Configuration File that
defines the system configuration.
See the Functions and How to sections for more information about the Configuration file.
Whats in the box: Wireless Beltpack + 1800 mAh Li-Ion Battery + miniUSB-USB cable + USB Charger
1
Overview.....................................................................................................
Basic Functions Explained.........................................................................
How to: battery, on/off, setup menu, set user......................................
How to: clone config, assign channels, pairing.....................................
How to: UI, color codes, pushbuttons, extended view.........................
How to: roaming, standalone, volume, encoders, reset, update.......
Reference....................................................................................................
Setup menu.................................................................................................
FAQ..............................................................................................................
Specifications.............................................................................................
Page 02
Page 03
Page 03
Page 04
Page 05
Page 06
Page 07
Page 10
Page 14
Page 14
User guide
v. 4a45

Green-Go GGO-WBPX Specifications

General

Brand	Green-Go
Model	GGO-WBPX
Category	Intercom System
Language	English

Summary

Basic Beltpack Functions

Pairing and Configuration

Covers pairing beltpacks with antennas and managing system configuration files.

User and Channel Management

Details user selection, channel assignment, and basic communication functions like Talk and Call.

How to Operate the Beltpack

Battery and Power Management

Instructions for mounting, charging the battery, and powering the beltpack on/off.

Setup Menu Navigation

Guide on entering, navigating, and exiting the beltpack's setup menu.

User and Channel Configuration

Steps for assigning channels, cloning configuration files, and pairing with antennas.

Advanced Operations and Settings

Details on roaming, standalone mode, volume, encoder assignment, reset, and firmware updates.

Setup Menu Tree

Program Audio and Channel Assignment

Audio Settings and Options

Connection and Device Options

Troubleshooting

Signal and Communication Issues

Resolving problems with no signal, poor signal, or inability to communicate with other units.

Echo and Pairing Problems

Specifications

Physical and Electrical Specifications

Wireless and Audio Specifications

Input and Output Performance