EasyManua.ls Logo

Green Machine GM10518 - User Manual

Default Icon
120 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Your chain saw has been engineered and manufactured to high standards for dependability, ease of operation, and operator
safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using
this product.
GM10514 / 14 in. 35cc Chain Saw
Scie à chaîne de 35cc de 35 cm (14 po)
Motosierra de 35 cm (14 pulg.), 35cc
GM10516 / 16 in. 38cc Chain Saw
Scie à chaîne de 38cc de 40 cm (16 po)
Motosierra de 40 cm (16 pulg.), 38cc
GM10518 / 18 in. 42cc Chain Saw
Scie à chaîne de 38cc de 45 cm (18 po)
Motosierra de 45 cm (18 pulg.), 38cc
ALL VERSIONS
TOUTES LES VERSIONS
TODAS LAS VERSIONES
ENGINE FAMILY: *HCPS.0424BD
FAMILLE DE MOTEUR : *HCPS.0424BD
FAMILIA DE MOTOR: *HCPS.0424BD
To register your Green Machine product, please visit:
http://register.greenmachinetools.com/
Pour enregistrer votre produit de Green Machine,
s’il vous plaît la visite :
http://register.greenmachinetools.com/
Para registrar su producto de Green Machine por
favor visita:
http://register.greenmachinetools.com/
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
SAVE THIS MANUAL FOR FUTURE REFERENCE
Cette scie à chaîne a été conçue et fabriquée conformément
aux strictes normes de fiabilité, simplicité d’emploi et sécurité
d’utilisation. Correctement entretenue, elle vous donnera des années
de fonctionnement robuste et sans problème.
AVERTISSEMENT : Pour réduire les risques de
blessures, l’utilisateur doit lire et veiller à bien comprendre le
manuel d’utilisation avant d’employer ce produit.
Su motosierra ha sido diseñada y fabricada de conformidad con
las estrictas normas para brindar fiabilidad, facilidad de uso y
seguridad para el operador. Con el debido cuidado, le brindará
muchos años de sólido y eficiente funcionamiento.
ADVERTENCIA: Para reducir el riesgo de lesiones,
el usuario debe leer y comprender el manual del operador antes
de usar este producto.
CONSERVER CE MANUEL POUR
FUTURE RÉFÉRENCE
GUARDE ESTE MANUAL PARA
FUTURAS CONSULTAS
NOTICE: Do not use E15 or E85 fuel (or fuel containing greater than 10% ethanol) in this
product. It is a violation of federal law and will damage the unit and void your warranty.
AVIS : Ne pas utiliser d’essence E15 ou E85 (ou un carburant contenant plus de 10 % d’éthanol) dans ce produit. Une telle
utilisation représente une violation de la loi fédérale et endommagera l’appareil et annulera la garantie.
AVISO: No utilice combustibles E15 o E85 (ni combustibles que contengan más de 10 % de etanol) con este producto.
Esto constituye una violación a la ley federal, dañará la unidad y anulará la garantía.

Questions and Answers

Summary

GreenMachine Operators Manual

Introduction and Product Overview

Covers manual purpose, models, fuel notice, and engineering statement.

General Safety Rules

Understanding Tool Hazards

Explains kickback, one-handed use, fatigue, and tool knowledge.

Safe Operating Practices

Covers grip, speed, reach, footwear, clothing, surfaces, fuel, bystanders, work area.

Safe Saw Operation Guidelines

Details on carrying, damaged saws, shut-off, brush, limbs, handles, confined spaces, ladders, and service.

Specific Safety Rules Introduction

Marks the beginning of specific safety rules section.

Specific Safety Precautions

Focuses on grip, user instructions, refueling, and kickback.

Symbols and Safety Alerts

Signal Word Meanings

Defines DANGER, WARNING, CAUTION, and NOTICE signal words.

Product Safety Symbols

Explains common hazard and safety symbols found on the product.

Operational Safety Symbols

Explains symbols related to operating the chain saw.

Glossary of Terms

Features and Specifications

Product Specifications

Lists technical details like bar length, engine displacement, and capacities.

Chain Saw Components Overview

Identifies and labels the main parts of the chain saw via diagram.

Component Function Explanations

Explains the purpose of key components like choke, brake, and primer bulb.

Assembly and Unpacking

Unpacking and Packing List

Guides on unboxing the product and verifying all parts are present.

Assembly and Modification Warnings

Safety warnings regarding product assembly and modifications.

Operation and Safety Precautions

General Operation and Safety

Basic operational advice, muffler heat, PPE, and attachment safety.

Applications of the Chain Saw

Lists the intended uses for the chain saw, such as limbing and felling.

Fueling and Refueling Safety

Critical safety measures for handling fuel and preventing fires.

Oxygenated Fuels Notice

Warning against using E15 or E85 fuel, and its impact on the unit and warranty.

Mixing and Filling Fuel Tank

Instructions for correctly mixing fuel and filling the fuel tank.

Adding Bar and Chain Lubricant

Procedure for filling the chain oil reservoir.

Operating the Chain Brake

How to engage and disengage the chain brake for safety.

Starting the Engine Procedures

Initial steps and checks before starting the engine.

Cold and Warm Engine Starting

Detailed steps for starting the engine under different temperature conditions.

Stopping the Engine

Methods for safely shutting down the saw and emergency procedures.

Adjusting Idle Speed

How to adjust the idle speed screw for proper engine idling.

Cutting Techniques: Pull and Push

Explains the forces involved when cutting with the saw.

Kickback Explanation and Prevention

Detailed explanation of kickback and how to avoid it.

Kickback Precautions and Grip

Focuses on preventing kickback through proper grip and stance.

Proper Handle Grip Technique

Details correct hand positioning and grip for safe operation.

Proper Cutting Stance and Work Area

Guidance on body positioning and clearing the work area for safety.

Basic Cutting Procedures

Step-by-step guide for making initial cuts on logs.

Felling Trees: Hazardous Conditions

Identifies dangerous conditions and hazards during tree felling operations.

Proper Tree Felling Procedure

Detailed steps for notching and backcutting trees for safe felling.

Removing Buttress Roots

Instructions for clearing large roots before felling a tree.

Bucking Logs Safely

Techniques and safety measures for cutting fallen trees into logs.

Bucking Under Stress: Over;Underbucking

Specific techniques for cutting logs with tension to prevent pinching.

Limbing and Pruning Techniques

Safe methods for cutting branches from trees.

Cutting Springpoles Safely

Warnings and procedures for cutting tensioned limbs or saplings.

Maintenance and Lubrication

General Maintenance Precautions

Essential safety steps to take before performing any maintenance.

General Maintenance Procedures

Guidelines for cleaning plastic parts and avoiding chemical damage.

Lubrication Requirements

Information on the lubrication of internal bearings.

Replacing the Guide Bar and Chain

Step-by-step instructions for replacing the guide bar and chain.

Adjusting Chain Tension

Procedure for setting the correct chain tension for safe operation.

Chain Maintenance and Sharpening Prep

General care, inspection, and preparation for chain sharpening.

Sharpening the Cutters

Detailed instructions for sharpening the chain's cutting teeth.

Filing Angles and Depth Gauge

Guidance on correct filing angles for top plate, side plate, and depth gauge.

Maintaining the Guide Bar

Steps for cleaning, reversing, and checking the guide bar for wear.

Mounting the SAFE-T-TIP Nose Guard

Procedure for correctly installing the anti-kickback nose guard.

Cleaning the Air Filter

Instructions for cleaning or replacing the air filter for optimal performance.

Cleaning the Starter Unit

How to clean the starter assembly cooling vents.

Adjusting the Carburetor

Procedure for adjusting the carburetor's idle speed.

Cleaning the Engine Components

Steps for cleaning cylinder fins and flywheel fins to prevent overheating.

Checking and Replacing Fuel Filter;Spark Plug

Procedures for maintaining fuel filters and replacing spark plugs.

Cleaning Exhaust & Spark Arrestor

Maintenance for exhaust port, muffler, and spark arrestor screen.

Inspecting and Cleaning Chain Brake

Ensures the chain brake mechanism is clean and functional.

Product Storage and High Altitude Operation

Guidance on safely storing the product and operating at high altitudes.

Maintenance Schedule

A table outlining recommended maintenance intervals and tasks.

Bar and Chain Combinations

Troubleshooting Engine Starting Issues

Troubleshooting Running and Chain Issues

Warranty Information

Limited Warranty Statement

Details the manufacturer's limited warranty terms and conditions.

Emissions Control System Warranty

Specific warranty coverage for emission-related components.

Owners Warranty Responsibilities

Outlines the owner's responsibilities for maintaining warranty coverage.

Emissions Parts List

Lists components included in the emissions control system warranty.

Service and Contact Information

Service, Repair Parts, and Model Info

Information on obtaining service, parts, and recording product details.

California Proposition 65 Warnings

Health warnings related to chemicals in the product or its use, specific to California.

Green Machine GM10518 Specifications

General IconGeneral
BrandGreen Machine
ModelGM10518
CategoryChainsaw
LanguageEnglish

Related product manuals