10
TROUBLESHOOTING (CONT.)
Issue Cause Solution
I do not know
when preheat is
complete
Once the Grill & Griddle is done preheating, it will beep five times and temperature
and time will flash on the LED display.
Top plate is not
getting hot
Did not select Upper
Grill or Both Grill.
Be sure to press button for either Both Grill or Upper Grill.
Bottom plate is
not getting hot
Did not select Lower
Grill or Both Grill.
Be sure to press button for either Both Grill or Lower Grill.
The unit shut off If the start button is not pressed within 15 seconds of setting time and temperature, the
Grill & Griddle will go into standby mode and OFF will appear on the display.
Grill & Griddle
is beeping five
times when
done cooking
This is standard. When the countdown timer runs out, the Grill & Griddle will beep again five times
and the LED screen will display done.
To Next Page
Loading...