To Next Page
A
Ashlee PhillipsAug 8, 2025
How to fix a GREEN SERIES FITNESS CIR-TM8000-G Treadmill when the console display does not illuminate?
- SshawnmartinezAug 8, 2025
If the console display of your GREEN SERIES FITNESS Treadmill does not illuminate, first ensure the on-off switch is turned ON and the indicator light is lit. If it's not lit, check the AC power source. Also, inspect the console wire to confirm it's correctly connected, paying attention to the connector points and insert PINs. Check the fuse near the ON-OFF switch. If the fuse is working, push it back and restart. If the issue persists, maintain the running belt and deck. If these steps don't resolve the issue, turn OFF the power, open the motor cover, turn ON the power again, and check the console power pilot lamp (LED2) on the interface PCB. If it's not lit, consider replacing the console.
General