Page 5
INTENDED CONDITIONS OF USE
While thanking you for your trust in our products, our CHIPPER Mod. CIP 1000 in
particular, we would remind you that the use of this machine is representative of a
style of life, where the environment protection is a basic principle and the recycling
practice takes the place of an indiscriminate disposal of waste.
Before starting to chip the trimmings and the wooden matters in general,
separate the materials according to the size in order to favour their inlet into the
chipper mouth.
Avoid triturating unsuitable materials as plastics or printed paper.
The chipper is intended for operating outdoor; of course, in case of bad
weather conditions, avoid using the machine and store it in a suitable and
sheltered place.
CIP1000 User's Handbook
SECTION A: GENERAL INFORMATION
CAUTION
Green Technik undertakes no responsibility in case any safety guards or
loading hoppers installed on the machine are changed or removed, as well
as in case of non-compliance with the obligations and/or prohibitions
expressly specified in this paragraph and, in general, of any of the rules and
provisions set forth in this Handbook.
To Next Page
Loading...