HVLS Touchscreen Control2
Verify that all of the following parts and hardware
have been received prior to beginning installation.
Contact your local representative or the manufacturer if
replacement parts are required.
NOTE: Additional parts (provided by others) may be
required to complete the control installation, including
additional wiring and hardware for mounting the control
to the building structure.
Control Components
Surface Mount Kit
Touchscreen
Interface (1)
RJ12 CABLE
POWER SUPPLY CABLE
Trim Cover (1)
RJ12 CABLE
POWER SUPPLY CABLE
RJ12 CABLE
POWER SUPPLY CABLE
Surface Mount
Enclosure (1)
Control Panel (1)
RJ12 CABLE
POWER SUPPLY CABLE
Recessed Mount Kit
Touchscreen
Interface (1)
RJ12 CABLE
POWER SUPPLY CABLE
Trim Cover (1)
RJ12 CABLE
POWER SUPPLY CABLE
RJ12 CABLE
POWER SUPPLY CABLE
Recessed Mount
Enclosure (1)
Control Panel (1)
RJ12 CABLE
POWER SUPPLY CABLE
Optional Control Components
Temperature/Humidity
Sensors (2)
RJ12 CABLE
POWER SUPPLY CABLE
Shielded, Twisted Pair (STP)
CAT-5e Cable (2)
RJ12 CABLE
POWER SUPPLY CABLE
RJ12 CABLE
POWER SUPPLY CABLE