EasyManua.ls Logo

Greenheck vari-green User Manual

Greenheck vari-green
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Installation, Operation and Maintenance Manual
Please read and save these instructions for future reference. Read carefully before attempting to assemble,
install, operate or maintain the product described. Protect yourself and others by observing all safety
information. Failure to comply with instructions could result in personal injury and/or property damage!
1
Vari-Green Motor
Table of Contents
Reference part number listed in chart to locate specific motor
information page number.
HP Voltage
* RPM
Range
Encl. FLA
Control
Method
Motor
Part No.
Pg.
1/6 115 300-1725 TENV
3.1 0-10V Only 311352 2
3.1 Pot Only 311353 2
3.4 Pot/0-10V
311731 3
312359 3
1/4 115 300-1725 ODP
3.9 0-10V Only 310107 2
3.9 Pot Only 310108 2
3.7 Pot/0-10V 311377 3
1/4
115/
208-230
300-1725 ODP 3.3/1.8 Pot/0-10V 310175 6
1/2 115 300-1725 ODP
6.2 0-10V Only 309025 2
6.2 Pot Only 309028 2
6.7 Pot/0-10V 311812 3
1/2
115/
208-230
300-1725 ODP 6.8/3.5 Pot/0-10V 310176 6
1/2 115 300-2500 ODP
6.5 0-10V Only 310307 2
6.5 Pot Only 310476 2
6.5 Pot/0-10V 312360 3
3/4 115 300-1725 ODP
10.1 0-10V Only 309026 2
10.1 Pot Only 309029 2
10.6 Pot/0-10V
311388 3
312619 3
3/4
115/
208-230
300-1725 ODP 9.0/4.9 Pot/0-10V 310177 6
3/4 115 300-2200 ODP
11.3 0-10V Only 310306 2
11.3 Pot Only 310475 2
11.3 Pot/0-10V 312361 3
1 115 300-1725 ODP 12.4 Pot/0-10V
310359 3
312362 3
1
115/
208-230
300-1725 ODP 11.4/6.3 Pot/0-10V 310178 6
1
115/
208-230
300-1725 TEFC 12.0/6.0 Pot/0-10V 311156 4
2 208-230 300 - 1725 TEFC 12.0 Pot/0-10V 310420 4
* Actual maximum RPM may vary. See RPM column in chart on
pg.10 for specific motor and fan combinations.
Vari-Green
®
Motor
The Vari-Green Motor is an electronically commutated
(EC) motor that uses AC input power and internally
converts it to a DC power supply which provides an
80% turndown capability and increased energy savings.
NOTE
When using a clamp meter to measure input amp
draw, the meter must be capable of reading a
non-linear current. Erroneous readings will occur
otherwise.
Troubleshooting ...........................7-9
Maximum RPM Table ....................... 10
®
®
Document 473681
Vari-Green
®
Motor and Controls

Other manuals for Greenheck vari-green

Question and Answer IconNeed help?

Do you have a question about the Greenheck vari-green and is the answer not in the manual?

Greenheck vari-green Specifications

General IconGeneral
BrandGreenheck
Modelvari-green
CategoryEngine
LanguageEnglish

Summary

Vari-Green Motor Overview

Vari-Green Motor Description

Explains the Vari-Green Motor as an electronically commutated (EC) motor converting AC to DC for energy savings.

Motor Features, Operation, and Wiring

Motor Operation Modes and Wiring

Covers potentiometer dial and 0-10V input operation, including wiring for control signals.

Advanced Motor Operations and Troubleshooting

Motor Troubleshooting Guide

Provides steps for diagnosing issues like motor not operating or not reaching maximum speed.

Diagnostic Indicators and Motor Operation Issues

Diagnostic LED Fault Codes

Lists fault indications based on diagnostic red LED blink counts for motor issues.

Motor Operation Troubleshooting

Addresses issues where the motor does not operate or is not wired correctly.

Remote Dial Control Assembly and Troubleshooting

Two Speed Control System

Maximum RPM Performance Table

RPM and Fan Combination Data

Provides a table correlating motor HP and fan types with maximum motor RPM.

Related product manuals