6000-Series Super Tugger Cable Pullers
Greenlee Tools, Inc. 6 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
Grounding Instructions
Electric shock hazard.
• Do not modify the plug provided
with the tool.
• Connect this tool to a grounded
receptacle on a 15-amp GFCI-
protected circuit.
Failure to observe these warnings
could result in severe injury or death.
This tool must be grounded. In the event of a
malfunction or breakdown, an electrical ground provides
a path of least resistance for the electric current. This
path of least resistance is intended to reduce the risk of
electric shock.
This tool’s electric cord has a grounding conductor
and a grounding plug as shown. Do not modify the
plug. Connect the plug to a corresponding receptacle
that is properly installed and grounded in accordance
with all national and local codes and ordinances.
Do not use an adapter.
220-Volt Model
15 Amp/125 Volt
Plug and Receptacle
This tool must be grounded. In the event of a
malfunction or breakdown, an electrical ground provides
a path of least resistance for the electric current. This
path of least resistance is intended to reduce the risk of
electric shock.
This tool’s electric cord has a grounding conductor
and a grounding plug as shown. Do not modify the
plug. Connect the plug to a corresponding receptacle
that is properly installed and grounded in accordance
with all national and local codes and ordinances.
Do not use an adapter.
15 Amp/250 Volt
Plug and Receptacle
Electric shock hazard.
• Do not modify the plug provided
with the tool.
• Connect this tool to a grounded
receptacle on a 15-amp GFCI-
protected circuit.
Failure to observe these warnings
could result in severe injury or death.
ReceptaclePlug
120-Volt Model
To Next Page
Loading...