OPERATION, SERVICE AND PARTS
INSTRUCTION MANUAL
849
1/2" - 2" ELECTRIC
PVC HEATER
999 6045.1 © 2019 Greenlee Tools, Inc. IM-849 REV 7 9/19
For additional copies
at no charge
order 999 6045.1
1. Read and understand all operating instruc-
tions before using.
2. This unit is designed to heat PVC conduit only.
Do not use for any other purpose.
3. Operate unit on rm, at, dry surface. Do not
expose heater to rain or snow.
4. Keep volatile or combustible material away
from the heater while in use.
5. Operate unit only in a well ventilated area.
6. Connect the heater to a grounded power
source of equivalent rating (120 V.A.C., 20
amp, 60 cycle).
7. Recommend use of a 20 amp G.F.C.I. Safety
Cord or Adaptor.
8. Wear gloves when operating this unit. When
opening and closing cover, use the attached
handles.
9. When not in use, turn heater off to reduce the
possibility of accidental burns.
10. Never leave conduit in heater unattended, as
conduit will become scorched.
11. Calrod element temperature 1000° F (540° C).
SAFETY FIRST
To Next Page
Need help?
General