Need help?Do you have a question about the GreenPower IET FORMULA GOBLIN G2 and is the answer not in the manual?
General| Brand | GreenPower |
|---|---|
| Model | IET FORMULA GOBLIN G2 |
| Category | Science Education products |
| Language | English |
Advice on using spanners for efficient nut and bolt tightening during assembly.
Method for loosely tightening bolts before final tightening to aid alignment.
Explanation of Nyloc nuts and their correct orientation for secure fitting.
Advice on using a tray to organize small parts during assembly to prevent loss.
Guidance on achieving smooth steering and adjusting resistance for optimal performance.
Specific safety advice on bolt insertion and tightening for the steering column assembly.
Instructions for aligning front wheels parallel and straight for proper steering.
Cautionary advice on fitting linch pins safely to prevent finger injury.
Tips on reducing friction with grease to increase car speed.
Guidance on tightening steering components for smooth, safe movement and control.
Instructions for fitting steering arms and ensuring proper thread engagement for steering.
Advice on using thread lock for non-Nyloc nuts to prevent vibration loosening.
Explanation of the single drive wheel and its role in power transfer and braking.
Instructions for correctly inserting the roll pin into the axle for secure wheel attachment.
Instruction on aligning and tightening grub screws for the axle bearing.
Explanation of caliper straddling the brake disc and alignment for free wheel rotation.
Warning about brake pad rubbing causing drag and slowing the car.
Importance of the isolator switch for immobilising the Goblin and overall safety.
Guidance on fitting the motor cage and ensuring correct component orientation.
Instructions for fitting and aligning the motor pulley with the axle pulley.
Advice on tightening the motor pulley grub screw with thread lock for security.
Guidance on setting correct drive belt tension for performance and longevity.
Reminder to fit the motor cage front fixings, matching the rear fixings.
Instruction to fit batteries only after wiring is complete and double-checked.
Cautionary advice on not over-tightening battery terminal bolts.
Tip to keep the safety harness buckle done up during fitting to prevent twisting.
Importance of securely adjusting the safety harness for driver restraint and safety.
To Next Page