GreenWorks Commercial 82T16 User Manual (English)

Questions and Answers:

S
Samantha HarperAug 5, 2025
What to do if my GreenWorks Commercial Trimmer doesn't start when I push the trigger?
- L
  Lauren PowellAug 5, 2025
  If your GreenWorks Commercial Trimmer fails to start when you push the trigger, there are several potential causes: * There may be no electrical contact between the trimmer and the battery pack. To resolve this, remove the battery pack, check the contact, and then reinstall the battery pack. * The battery pack might be depleted. In this case, charge the battery pack. * The lock-out button and trigger may not be pushed simultaneously. Ensure you pull and hold the lock-out button while pulling the trigger to start the trimmer.
M
Mrs. Jade HernandezAug 14, 2025
Why is my GreenWorks Commercial 82T16 Trimmer not starting even when I push the trigger?
- M
  Mr. Paul NelsonAug 15, 2025
  Your GreenWorks Commercial Trimmer may not start due to: * Lack of electrical contact between the trimmer and the battery pack. Try removing the battery, checking the contact points, and reinstalling it. * A depleted battery pack. Ensure the battery is adequately charged. * Incorrect engagement of the lock-out button and trigger. Make sure to pull and hold the lock-out button while pulling the trigger.
E
Eddie SmithAug 27, 2025
How to fix a GreenWorks Commercial Trimmer that won't start when the trigger is pressed?
- D
  Daniel FergusonAug 27, 2025
  If your GreenWorks Commercial Trimmer doesn't start when you press the trigger, consider these solutions: 1. Check the battery pack connection. Remove and reinstall the battery to ensure proper contact. 2. Charge the battery pack if it's depleted. 3. Make sure you are simultaneously pulling the lock-out button and the trigger to initiate the start.

GreenWorks Commercial 82T16 Specifications

General

Power Source	Battery
Voltage	82V
Cutting Width	16 inches
Line Diameter	0.095 inches
Run Time	Up to 45 minutes
Battery Type	Lithium-Ion
Charging Time	30 minutes
Shaft Type	Straight

Summary

Product Description

Purpose of the String Trimmer

Details the intended use of the machine for cutting grass and light weeds at ground level.

Overview of Trimmer Components

Identifies and labels the main parts of the string trimmer through a diagram.

Important Safety Instructions

Machine Symbols and Explanations

Understanding Risk Levels

Service Information

Environmentally Safe Battery Disposal

Proposition 65 Warning

Installation Procedures

Unpacking the Machine

Instructions for opening the package, removing parts, and discarding packaging.

Attaching the Guard

Steps to install the guard onto the string trimmer, with a warning about the cut-off blade.

Attaching the Auxiliary Handle

Guide to attaching the auxiliary handle and lower clamp to the shaft for better control.

Installing the Battery Pack

Steps for properly inserting and securing the battery pack into the trimmer's compartment.

Removing the Battery Pack

Procedure for safely releasing and detaching the battery pack from the machine.

Operating the String Trimmer

Machine Controls Overview

Details the function of various controls including ON/OFF button, reverse button, and LED indicator.

Starting the Machine

Step-by-step instructions on how to safely power on and start the string trimmer.

Stopping the Machine

Procedure for safely shutting down and turning off the string trimmer.

Operation Tips and Warnings

Provides advice for effective operation and safety precautions to maintain clearance and guard usage.

Line Cut-off Blade Function

Explains the role of the line cut-off blade in maintaining cutting diameter and line length.

Cutting Tips and Techniques

Offers guidance on tilting, sweeping direction, and avoiding hazards for efficient grass cutting.

Adjusting Cutting Line Length

Describes how to automatically feed and trim the cutting line by hitting the trimmer head on the ground.

Maintenance Procedures

General Maintenance Information

Highlights essential pre-maintenance checks and professional service limitations.

Cleaning the Machine

Instructions for cleaning the trimmer using a moist cloth and mild detergent, avoiding harsh chemicals.

Installing the Cutting Line

Step-by-step guide on how to thread and load new cutting line into the spool.

Replacing the Spool

Procedure for removing the old spool and installing a new one with cutting line.

Replacing the Cutting Line

Detailed steps for cutting, bending, and installing new cutting line onto the spool.

Removing the Trimmer Head

Instructions on how to fix the trimmer head and loosen the nut to remove it.

Assembling the Trimmer Head

Steps to attach the trimmer head to the housing and tighten the nut securely.

Transportation and Storage

Moving the Machine Safely

Safety precautions to take when moving the trimmer, including wearing gloves and removing the battery.

Storing the Machine

Guidelines for storing the trimmer safely, keeping it away from children and corrosive agents.

Technical Data

Troubleshooting Guide

Limited Warranty Information

Related product manuals

GreenWorks Commercial 82PH20T

10 pages

GreenWorks Commercial 82T16 User Manual

Table of Contents