Do you have a question about the GreenWorks Commercial CZ52R and is the answer not in the manual?
Motor | Brushless |
---|---|
Cutting Width | 21 inches |
Deck Material | Steel |
Weight | 84 lbs |
Drive System | Rear-Wheel Drive |
Brushless Motor | Yes |
Power Source | Battery |
Self-Propelled | Yes |
Cutting Height | 1.25" - 4" |
Warranty | 4-year limited |
Provides general operational and maintenance guidance for the mower.
Guidance for owners on reading and understanding the manual and decals for safe operation.
Explains how to use the manual for operation, adjustment, and maintenance.
Instructions for registering the unit to validate warranty protection.
Information on obtaining authorized warranty repair and service.
Illustrates and labels the main components of the mower.
Outlines responsibilities and qualifications for safe mower operation.
Covers machine maintenance, safety shields, and component checks.
Details on inspecting and clearing the mowing area of potential hazards.
Safe operating procedures for mowing, including speed and maneuvering.
Safety precautions and procedures for performing maintenance on the mower.
Critical safety guidelines for operating the mower on slopes.
Important warnings and precautions to ensure child safety around the mower.
Safety instructions for loading and unloading the mower using ramps.
Guidelines for safe towing practices and weight limits.
Safety precautions for handling and using batteries and chargers.
Detailed safety instructions for handling, charging, and storing batteries.
Explains the meaning of various symbols found on the mower.
Defines signal words and their meanings for identifying risk levels.
Provides instructions for environmentally responsible battery disposal.
Information regarding California Proposition 65 chemical warnings.
Identifies and explains the functions of the control panel components.
Details the controls on the left side of the operator's station.
Details the controls on the right side of the operator's station.
Explains how steering levers control mower direction and speed.
Describes the safety system preventing unintended starts.
Information and safety warnings for the Roll Over Protective Structure.
Explains the function and adjustment of anti-scalp wheels.
Instructions for operating the neutral bypass knob.
Pre-operation checks and adjustments for safe mower use.
Instructions for adjusting the mower seat for proper positioning.
How to adjust steering control levers for operator comfort.
Procedures for setting the mower deck cutting height.
Steps to start the mower and engage the drive system.
Detailed step-by-step instructions for starting the mower.
Instructions on operating steering control levers for forward, reverse, and turns.
Procedures for safely stopping the mower and disengaging systems.
Tips for smooth operation, turning, and mowing techniques.
Comprehensive safety guidelines and precautions for operating on slopes.
Critical safety precautions related to the mower's electrical components.
Overview of the 82-volt electrical system and its components.
Safety and maintenance information for batteries and chargers.
Location and details of the battery charging port.
Best practices for efficient and safe battery charging.
Step-by-step guide for charging the mower's battery.
Procedures for safely replacing the battery module.
Detailed steps for safely disconnecting battery modules.
Detailed steps for safely reconnecting battery modules.
Explains the function of the digital display for system information.
Specific details and interpretations for the CZ series digital display.
Specific details and interpretations for the PZ series digital display.
Information on system fault detection and indication.
Fault codes and system descriptions for the CZ series.
Fault codes and system descriptions for the PZ series.
Troubleshooting steps for controller overcurrent and sensor faults.
Troubleshooting steps for precharge and controller undertemperature faults.
Troubleshooting steps for controller overtemp and voltage faults.
Troubleshooting steps for cutback, supply failure, and digital output faults.
Troubleshooting steps for controller overcurrent and sensor faults.
Troubleshooting steps for precharge and controller undertemperature faults.
Troubleshooting steps for controller overtemp and voltage faults.
Troubleshooting steps for supply failure and digital output faults.
Procedures for inspecting and maintaining mower blades for efficiency.
Step-by-step instructions for safely removing the mower blade.
Step-by-step instructions for safely installing the mower blade.
Recommended tire pressure for level mowing.
Specifies the type of lubricant to use for maintenance.
Lists critical torque values for wheel lug nuts and blade bolts.
Guidelines for inspecting and maintaining the seat belt system.
Procedures for inspecting and maintaining the ROPS structure.
Proper care and maintenance practices for the lithium battery.
Steps to prolong the life cycle of lithium battery modules.
Important notes regarding professional servicing and safety.
Instructions for cleaning the mower's exterior and underside.
Steps for preparing the mower for storage to prevent damage.
Troubleshooting steps for when the mower fails to start.
Troubleshooting steps for identifying and resolving abnormal vibration.
Troubleshooting steps for achieving an even cutting height.
Steps to level the mower deck for consistent cutting.
Instructions for correctly setting the anti-scalp wheels.
Procedure for cleaning the underside of the mower deck.
Steps to ensure proper tire inflation for optimal performance.
Guidance on what to do if the blade spindle is bent.
Troubleshooting steps for loss of deck operation or display image.
Detailed procedure for testing deck system resistance.
Lists technical specifications for various mower models.
Technical data for the gross vehicle weight of the mower.
Technical data for the overall length of the mower.
Technical data for the overall width including discharge.
Technical data for the overall height of the mower.
Technical data specifying the width of the mower deck.
Technical data for the forward speed range.
Technical data for the reverse speed range.
Technical data for the adjustable cutting height range.
Details the coverage provided by the limited warranty for residential and commercial use.
Identifies authorized personnel for performing warranty service.
Lists exclusions and items not covered by the limited warranty.
Legal disclaimer concerning warranty limitations and responsibilities.
Outlines limitations on remedies for warranty breach.
Specifies the time limits for commencing warranty actions.
States that this agreement constitutes the entire warranty agreement.
Details the owner's responsibilities for maintenance and safe operation.
Explains the allocation of product failure risks between parties.
Instructions for registering the product warranty.