GreenWorks 26032 User Manual

GreenWorks 26032

28 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Read all safety rules and instructions carefully before operating this tool.

Owner’s Manual

TOLL-FREE HELPLINE: 1-888-90WORKS

(888.909.6757)

12 Amp Electric Snow Thrower

26032

Questions and Answers:

A
Austin RussellJul 26, 2025
What to do if my GreenWorks Snow Blower does not start?
- K
  Katrina AyalaJul 27, 2025
  If your GreenWorks Snow Blower doesn't start, there are several potential causes: * The power cord might be disconnected from the switch. Reconnect the cord and use the cord restraint to keep it close to the switch. * The extension cord might not be connected to the plug. Connect the snow thrower's plug to the extension cord. * The extension cord might not be connected to the power source. Plug the extension cord into a live 120 V AC, 60 Hz outlet. * The switch might be defective, requiring replacement.
A
Alexis GarnerAug 3, 2025
What to do if the motor is on, but the rotor does not turn on my GreenWorks 26032?
- S
  Steven BeasleyAug 3, 2025
  If the motor of your GreenWorks Snow Blower is running but the rotor isn't turning, the belt is likely damaged and needs to be replaced.
G
goodmansamanthaAug 10, 2025
Why does my GreenWorks 26032 Snow Blower leave a thin layer of snow behind?
- D
  David GrayAug 10, 2025
  If your GreenWorks Snow Blower leaves a thin layer of snow behind, the scraper is likely worn and needs replacement.
S
Steven MartinAug 17, 2025
How to fix GreenWorks 26032 handle if it is not in position?
- C
  Christopher CarterAug 17, 2025
  If the handle of your GreenWorks Snow Blower is not in the correct position, adjust the handle height and make sure the carriage bolts are properly seated. Then, tighten the knobs.

GreenWorks 26032 Specifications

General

Power Source	Electric
Motor	13 Amp
Clearing Width	20 inches
Clearing Depth	10 inches
Voltage	120V
Warranty	4 years

Summary

Product Specifications

Safety Information

Product Symbols and Meanings

Electrical Safety and Connections

Grounding Instructions

Guidance on proper grounding to reduce electric shock risk.

Extension Cord Guidelines

Requirements and precautions for using extension cords with the snow thrower.

Assembly Instructions

Handle Assembly

Discharge Chute Assembly

Directional Chute Arm Assembly

Operating Your Snow Thrower

Starting the Snow Thrower Safely

Safety precautions and steps for safely starting the snow thrower.

Overload Protection Switch Function

How to identify, reset, and troubleshoot the overload protection switch.

Adjusting Snow Discharge Direction

Instructions on how to change the direction and angle of snow discharge.

Maintenance and Care

Replacing the Scraper Blade

Replacing the Rotor Assembly

Replacing the Drive Belt

Troubleshooting Common Issues

Limited Four-Year Warranty Information

Related product manuals

Preview: GreenWorks 2600502

GreenWorks 2600502

Preview: GreenWorks 2600202

GreenWorks 2600202

Preview: GreenWorks 2600802

GreenWorks 2600802

Preview: GreenWorks 2600202CT

GreenWorks 2600202CT

40V 20'' Cordless Snow Thrower 2600200

Preview: GreenWorks SN60L02

GreenWorks SN60L02

Preview: GreenWorks GW80VSNW200

GreenWorks GW80VSNW200

Preview: GreenWorks GWSN20130

GreenWorks GWSN20130