GreenWorks BPS40B00 - Lock the Spray Gun Trigger; Unlock the Spray Gun Trigger; Change the Spray Tip

8.2 LOCK THE SPRAY GUN TRIGGER
11
10
1. Press the trigger (11) and push forward the trigger safety
lock-out (10) to lock the gun trigger.
2. Release the spray gun trigger (11) to stop water flow
through the spray tip.
8.3 UNLOCK THE SPRAY GUN
TRIGGER
1. Pull backwards on the trigger safety lock-out (10) to
unlock the gun trigger.
8.4 CHANGE THE SPRAY TIP
8a 8b
8
9
8c 8d 8e
1. Insert any of the spray tips (8a - 8e) onto the spray wand
(9).
WARNING
After changing the spray tip, if the angle of the spray tip is
not appropriate, adjust the joint between the gun wand and
the triggle handle and tighten it again.
9
English
EN