18
W450769A 01/14
2.3.5 Auxiliary Head Dimensions
Length - Measure the distance between the Auxiliary Head sheave and the Main Head sheave.
USE THE SPACE PROVIDED IN APPENDIX A TO RECORD THE MEASUREMENT.
2.3.6 Stowed Jib Dimensions
USE THE SPACE PROVIDED IN APPENDIX A TO RECORD THE MEASUREMENTS.
Dimension “G” - This is the distance between the center of the boom pivot and the center of gravity of
the stowed jib.
Centerline of Boom
Offset Angle
X.X°
Auxiliary Head
Main Boom
Length
Main Boom
Balanced Pick Point =
Center of Gravity
Jib Assembly
G
To Next Page
Loading...
Need help?
General