Greystone F 2609 E - Operation Instructions

OPERATING INSTRUCTIONS:
Read all instructions and warning prior to operating the appliance.
Ensure that all controls are in the "OFF" position before plugging the appliance in to a properly
grounded electrical outlet.
The control panel of the appliance is located behind the wire grate above the window on the front (Fig. 1).
Fig. 1
~!~~!!!!!!~~~..- Grate (fold down to
~ ---- reveal control panel)
Fig. 2
Co
-
r-,
0
POWER
N
+0
FLAME
HEAT
86
0
SETTING ~
•
0
07~ =
co ""
~ ~
-0
-'
o 750W 68.f'",#O~~\'\,~
o 1500W 59
ON/OFF
o AUTO
SET TEMP.r
==
o
E c
B
A
Using the Control Panel and the Remote Control:
Simulated Flame Effect:
263/8"
,
j
263/8"
F-
U : 11I11I1111I1111I1111 :!ij!!~
I
25"
•
Push button (A) power ON/OFF.
....-----.
•
Push button (0) to turn the flame ON/OFF.
0
LOg:,
•
Push button (E) to -: flame brightness.
E
[0+.
Heat Setting:
E
~O-
•
Push button (C) once to activate low heat setting
C-
O HEAT
•
Push button (C) second time to activate high heat setting
SETTING
•
Push button (C) third time to activate the "AUTO" function.
Turn thermostat (8) dial to desired setting.
•
Push button (C) fourth time to shut heater off
NOTE: Flame and/or heat can work separately or together.
4