Need help?Do you have a question about the Griffin Technology iMic and is the answer not in the manual?
General| Type | USB Audio Interface |
|---|---|
| Audio Output | Stereo |
| Bit Depth | 16-bit |
| Input | 3.5mm stereo mini-jack |
| Output | 3.5mm stereo mini-jack |
| Compatibility | Mac |
| Interface | USB |
| Connector | USB |
| Sample Rate | 48 kHz |
Plug the iMic into any available USB port on your computer for initial connection and power.
Set up your computer to recognize the iMic as the audio input device and prepare for recording.
Connect your audio source, such as a turntable, tape deck, or microphone, to the iMic's input jack.
Slide the iMic's Level switch to 'LINE' for audio sources like CD players, cassette decks, or guitars with active pickups.
Slide the iMic's Level switch to 'MIC' for microphones, passive guitars, or turntables without preamps.
Find contact information for Griffin Support, available by phone or online for product assistance.
Information on the product's warranty, which is backed by industry-leading customer service.
To Next Page