43
ELE Model (G10) - Automatic monitoring of the level of the water in the water heater
Electronic model with microprocessor managed control panel with pushbottons that operate independently from one another. It enables varying amounts
of coffee to be dispensed using different dosing patterns. The pushbottons are identified by warning leds.
Put the required amount of coffee into the filter holder and fit it under the unit. Next, press the key (M1....M5) corresponding to the desired delivery on
the relative keyboard. If the wrong selection is made, press the key again to stop supply.
A
C
L
N D
E
MAX
MIN
M1 M2 M3 M4 M5
B
M1 M2 M3 M4 M5
B
A - Emergency Start/Stop dispensing switch
B - Steam knob
C - Hot water knob
D - Water heater pressure gauge
E - Main switch
L - Boiler water level indicator (optional)
N - Coffee dispensing pressure gauge
M1 - Coffee dispenser button for a small cup of coffee
M2 - for a big cup of coffee
M3 - for two small cups of coffee
M4 - for two big cups of coffee
M5 - Programming
To Next Page
Loading...
