Page 31
Shuttle Brewers & Airpot/Shuttle Brewers
Wiring Diagram #091-548
NOTE:
1) ONE GROUP OF WARMER COMPONENTS PER
BREW HEAD ON P AND RAPS MODELS.
2) TRANSFORMER MUST BE USED WHEN NEUTRAL
LINE IS NOT PROVIDED.
3) IF MODEL RAP, DELETE WARMER COMPONENTS.
4) IF MODEL IS RAPS, DELETE WARMER LIGHT AND
REPLACE WARMER ELEMENT WITH NEMA 6-15 RE-
CEPTACLE.
NOTES:
1) IF PROVIDED WITH OPTION C21A, THREE HEATERS, SEE HEATER WIRING DIAGRAM 091-182.
2) WHEN PROVIDED WITH OPTION C14, AUTOMATIC WARMER SHUTOFF, SUBSTITUTE ACTIVATED SWITCH FOR
WARMER TOGGLE.
To Next Page
Loading...
