To Next PageTo Next PageWhat to do if Grizzly Tools ERM 1232-2 Lawn Mower blade fails to turn?
If the blade of your Grizzly Tools Lawn Mower fails to turn, it could be due to the blade being blocked by grass; remove the grass. Alternatively, the blade screw might be loose; tighten the blade screw.
What to do if my Grizzly Tools ERM 1232-2 equipment does not start?
If your Grizzly Tools Lawn Mower doesn't start, there could be several reasons. First, check the socket, cable, wire, and plug to ensure the power is on; have an electrician carry out any repairs. Also, the start lever or release button might be defective, in which case you should contact customer services. Finally, if the grass is too long, set a greater cut height and lift the front wheels slightly by pressing down on the handle bar.
Why is my Grizzly Tools ERM 1232-2 Lawn Mower motor stopping?
If the motor of your Grizzly Tools Lawn Mower stops, it is likely due to a blockage by a foreign object. Remove the foreign object to resolve this.
Why Grizzly Tools ERM 1232-2 result is unsatisfactory or motor labours?
If you find the result unsatisfactory or the motor labours on your Grizzly Tools Lawn Mower, it could be due to several factors. The cut height might be too low, so try setting a higher cut height. The blade might be blunt, in which case you should have it sharpened or replaced. The blade area could be blocked, so clean the equipment. Lastly, the blade might be assembled incorrectly, so ensure it is installed correctly.
How to fix strange noises, rattling or vibrations in Grizzly Tools ERM 1232-2?
Strange noises, rattling, or vibrations in your Grizzly Tools Lawn Mower can often be attributed to a loose blade screw. Try tightening the blade screw. If the problem persists, the blade may be damaged and require replacement.
Covers product welcome, quality, manual importance, and handling instructions.
Specifies the equipment is for domestic lawns only; misuse poses risks.
Lists package contents and provides a parts identification list.
Details operational features and technical data of the lawnmower.
Covers basic safety rules for operating the electric lawnmower.
Explains various symbols and their safety implications during operation.
Details symbols indicating injury prevention, harm/damage prevention, and proper handling.
Outlines user responsibility, avoiding hazards, and safe operating practices.
Details clothing, pre-use checks, protective equipment, and spare parts usage.
Covers safe handling, working on slopes, and avoiding hazards during operation.
Instructions on pace, starting, tilting, carrying, and avoiding discharge chute.
Advises against use in rain, poor weather, with damaged parts, or near flammable liquids.
Guidance on checking parts, repairs, storage conditions, and handling blades.
Details mains voltage, RCD connection, earthed parts, and extension cable specifications.
Step-by-step guide to attach the switchbox to the handle.
Instructions for mounting wheels, washers, splints, and hubcaps.
Steps for attaching lower bars and securing them with quick-release levers.
Guides on mounting the handle, securing cable, and assembling the grass box.
Detailed steps for powering the lawnmower on and off using the switchbox and start handle.
Explains the fill indicator and how to adjust the cutting height.
Covers mowing practices, slope work, cable management, and routine cleaning.
Details routine cleaning, blade replacement, and maintenance checks.
Provides guidance on storing the unit and disposing of it responsibly.
Information on obtaining parts, warranty terms, and repair services.
Lists causes and fixes for the lawnmower failing to start.
Addresses motor stops due to blockages or length, and blade failure to turn.
Covers causes and solutions for unusual noises, rattling, or vibrations.
A detailed diagram showing all components of the lawnmower with numerical references.
Lists addresses, phone numbers, and emails for service centers in various countries.
General| Cutting Width | 32 cm |
|---|---|
| Power | 1200 W |
| Collection Box Capacity | 30 L |
| Engine Type | Electric |
| Engine Power | 1200 W |
| Cutting Height Adjustment | 20-60 mm |
