EasyManua.ls Logo

Grizzly EKS 1835-2 QTX - User Manual

Grizzly EKS 1835-2 QTX
168 pages
Go to English
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
EKS 1835-2 QTX
Elektro-Kettensäge
Motosega elettrica
Elektrische kettingzaag
Tronçonneuse électrique
Elektryczna piła łańcuchowa
Electric chain saw
Elektrická řetězová pila
Grandininis elektrinis pjūklas
Originalbetriebsanleitung
Traduzione delle istruzioni per l’uso in originale
Vertaling van de originele gebruiksaanwijzing
Traduction de la notice d’utilisation originale
Tłumaczenie oryginalnej instrukcji obsługi
Translation of the original instructions for use
Překlad originálního návodu k obsluze
Originalios eksploatavimo instrukcijos vertimas
DE
IT
NL
FR
PL
GB
CZ
LT

Table of Contents

Questions and Answers

  • R
    Russell FrancisAug 6, 2025
    Why my Grizzly EKS 1835-2 QTX does not start?
    • M
      Michael RoseAug 6, 2025
      If your Grizzly Chainsaw isn't starting, it could be due to several reasons: * The mains voltage might be defective. Check the plug socket, cable, line, and plug. If needed, have an electrical specialist make repairs. Also, inspect the house protection fuse. * The On/Off switch could be defective, or the carbon brushes worn. In these cases, contact customer service for repair. * The motor itself might be defective, also requiring repair by customer service.
  • A
    Alexa SandovalAug 13, 2025
    What to do if the chain of my Grizzly EKS 1835-2 QTX Chainsaw gets hot and smokes?
    • W
      warrencynthiaAug 13, 2025
      If the chain of your Grizzly Chainsaw becomes hot, you notice smoke during sawing, or the rail discolors, it's likely due to too little chain oil. Check the oil level and refill it if needed. Also, inspect the oil automatic system and clean the oil outflow duct. If necessary, have it repaired by customer service.
  • A
    Ashley KellyAug 20, 2025
    How to improve the cutting performance of my Grizzly EKS 1835-2 QTX Chainsaw?
    • L
      Lauren MeyersAug 21, 2025
      If your Grizzly Chainsaw has inferior cutting performance, it could be due to a few reasons: 1. The saw chain might be incorrectly mounted. Ensure it's mounted correctly. 2. The saw chain could be blunt. Sharpen the cutting teeth or replace the chain. 3. The chain tension might be insufficient. Check and adjust the chain tension.
  • M
    Mario BaileyAug 27, 2025
    What to do if the chain does not rotate on my Grizzly Chainsaw?
    • T
      timothy30Aug 28, 2025
      If the chain of your Grizzly Chainsaw isn't rotating, the chain brake might be blocking it. Check the chain brake and release it if necessary.

Summary

Intended Purpose

Safety Notes

Symbols Explained

Explains symbols displayed on the chainsaw and within the instruction manual.

General Power Tool Safety

Provides general safety guidelines applicable to all power tools.

Electrical Safety Precautions

Details precautions against electrical shock and hazards.

Personal Safety Guidelines

Emphasizes user alertness, protective equipment, and body positioning.

Power Tool Usage and Care

Chain Saw Specific Warnings

Kickback Prevention

Addresses the causes of kickback and methods to avoid it.

Chainsaw Overview

Chainsaw Function Description

Explains how the chainsaw's motor and lubrication systems operate.

Parts Overview

Lists and identifies all parts of the chainsaw with corresponding numbers.

Chainsaw Safety Features

Details the protective features of the chainsaw.

Initial Setup and Operation

Blade Assembly

Step-by-step instructions for attaching the guide bar.

Saw Chain Assembly

Instructions for correctly fitting the saw chain onto the bar.

Saw Chain Tensioning

Chain Lubrication

Operating the Chainsaw

Switching the Chainsaw On

Step-by-step guide to safely start the electric chainsaw.

Chain Brake Check

Procedures for verifying the functionality of the chain brake.

Oil System Check

How to ensure the automatic oiling system is working correctly.

Sawing Techniques

General Sawing Guidance

General advice on sawing, noise, and preparing the wood.

Bucking Technique

Techniques for cutting felled trees into smaller sections.

Liming Technique

Felling Trees Safely

Maintenance and Cleaning

Chainsaw Cleaning

Instructions for cleaning the chainsaw after use.

Maintenance Schedule

Table specifying regular maintenance tasks and their frequency.

Saw Chain Oiling

Saw Chain Sharpening

Chain Tension Adjustment

New Saw Chain Setup

Chain Bar Maintenance

Storage Instructions

Waste Disposal and Environment

Spare Parts and Accessories

Technical Specifications

Warranty Information

Troubleshooting Guide

Repair Service Information

Information on how to obtain repair services for the chainsaw.

EC Declaration of Conformity Translation

Exploded Parts Diagram

Grizzly Service Centers

Grizzly EKS 1835-2 QTX Specifications

General IconGeneral
BrandGrizzly
ModelEKS 1835-2 QTX
CategoryChainsaw
LanguageEnglish

Related product manuals